Product Description
- Ready-to-use, pre-mixed, chemically suspended ceramic shell slurries
- Simplify slurry make-up
- Reduce expense and equipment maintenance - no propeller mixers required to wet-out refractory
- Reduce labor costs associated with weighing and mixing flour and binder components
- Eliminate time wasted waiting for a slurry to wet-out
- Eliminate continuous slurry mixing
- Save electricity and lower costs by turning tanks off when not in use
- Eliminate the risk of slurry loss and costly replacement due to electrical failure or a damaged tank
- Simplify slurry maintenance
- Reduce labor costs and time associated with intensive slurry testing
- Proven casting performance
- Stronger layers, reducing the potential for buckling, lifting or cracking defects
- Fused silica-based material
- Recommended for non-ferrous metal casting initial and backup coats
Package size: 60 pound slurry
R&R recommends using SuspendaSlurry FS material 60 lb slurry with 1 bag of Ranco-Sil A and 2 bags Ranco-Sil B fused silica sands.
This product is also available in the EU, contact eucustomerservice@ransom-randolph.com for a quote.
Product Videos
Custom Field
Product Reviews
11 Reviews Hide Reviews Show Reviews
-
Suspendaslurry
My personal Game Changer. I discovered this product on a home foundry bulletin board. I had been sand and investment casting for a couple years but needed more. Then I found this miracle liquid. I am finally making stuff I dreamed about. I can cast pretty much ANYTHING. It repairs like a champ after any mold cracks, and I have actually re-assembled completely broken molds with nearly perfect results. I love this stuff. I have gone through quite a bit of it at this point. Check out @ferrisbeu on Instagram
-
Suspendaslurry
I am on my second bucket of this wonderful stuff. It has made it easy for me to cast bronze in my backyard without the mess of Plaster of Paris. No cracks, no bubbles, makes for a finished piece right out of there shell.
-
Suspendaslurry and A and B sand
I just finished using the Suspendaslurry for the first time after using prime coat for almost 30 years for my college classes. I am setting up a mold making facility at my home. after using Prime coat for more than 30 years for me college classes, I am setting up a mold making facility in my home studio. i have just finished usisng Suspendaslurry with A and B sand. the results were very satisfactory. It was easy to use the Suspendaslurry. It does not require constant stirring and has a great consistancy so it adheres well to the molds. It came securelly wrapped to survive winter cold and came q;uickly. thank you very much
-
Suspendaslurry
We love this stuff and it is always consistent! Definitely perfect for the way our foundry at Flatlanders works!
-
Great Product
Great product! Very reliable.
-
So much better than the old days of constant mixing
R&R is a very responsible company, I received a 60# order of slurry that had spillage /damage and they sent me a replacement without me having to ask, A+ first class
-
great stuff
easy to use, excellent communication with ransom and randolph.
-
Im noviss and this stuff makes me look good
I just mixxed it up and dipped my pla model rolled it in sand about 5 or 6 times then burned it out. It didnt crack or anything so i turned around melted aluminum poured it and was a prfect part
-
Suspend a slurry. Bucket
Product is great! The price was more than I would have liked to pay.
-
SuspendaSlurry
I have been using Suspendaslurry for 4 years casting silicon bronze at home. The slurry has the major benefit of not needing constant mixing. Be sure you do mix it once a month and each time before dipping for best results. You can see it in use on my youtube channel. https://www.youtube.com/user/jagboy69
-
Phenomenal Customer Service
I raised an issue with customer service and had an almost immediate response. The resolution of my issue was far more than expected!
