Bronze Art/Ceramic Shell Casting

Ranco-Sil™ B (30/50 mesh) fused silica sand - 55 lbs.

Electrically fused, high purity silica Produced from a naturally occurring mineral and is therefore subject to variability Low ther

SuspendaSlurry® FS material - 60 lbs.

Ready-to-use, pre-mixed, chemically suspended ceramic shell slurries​ Simplify slurry make-up​ Reduce expense and equipm

Ranco-Sil™ A (50/100 mesh) fused silica sand - 55 lbs.

Electrically fused, high purity silica Produced from a naturally occurring mineral and is therefore subject to variability Low ther

Ranco-Sil™ 4 (-200 mesh) fused silica flour - 55 lbs.

Electrically fused, high purity silica Produced from a naturally occurring mineral and is therefore subject to variability Low ther

SuspendaSlurry FS non-ferrous bronze art casting kit (50 gallon)

Designed for casting non-ferrous metals Package size: Pre-mixed 50 gallon slurry + corresponding stuccos (contains): SuspendaSlurry®

SculptaCast™ Dragon wax - 44.1 lbs.

General purpose sculpture wax ideal for painting and slush casting Provides consistent results and the following application attributes:

SculptaCast™ Victory wax - 65 lbs.

Versatile, virgin petroleum material ideally suited for modeling Provides consistent results and the following application attributes:

Zircon sand - 50 lbs.

Granular form Naturally occurring refractory mineral and is therefore subject to variability Chemically inert

SculptaCast™ Limerick wax - 44.1 lbs.

Technically engineered, high-grade sculpture wax ideal for painting and slush casting Provides consistent results and the following application attributes:

SuspendaSlurry® FS material - 650 lbs.

Ready-to-use, pre-mixed, chemically suspended ceramic shell slurries​ Simplify slurry make-up​ Reduce expense and equipm

C-1 Core Mix - 44 lbs.

Strong core material used to make preformed cores Used primarily by ferrous casters Exothermic as it sets; which, in most cases, pr

DCH-10 antifoam - 1 gallon

Zircon flour (200 mesh) - 50 lbs.

Flour form Naturally occurring refractory mineral and is therefore subject to variability Chemically inert

SculptaCast™ Hardener wax - 50 lbs.

Technically engineered, high-grade sculpture wax hardener and modifier Specifically formulated with select refined petroleum-based raw materials to impart improvements to:

Core Hardener 2000™ binder - 5 gallons

Used to strengthen the ceramic shell in small holes, slots, and hard-to-reach openings Helps prevent metal penetration by strengthening the shell

Kwik-Core™ material - kit (44 lbs./2 gallons)

Comprised of Kwik-Core™ powder and Kwik-Core™ binder Designed for hand packing cores Used primarily by ferrous casters<

Primcote® binder (55 gallon drum)

Optimizes ceramic shell slurries Eliminates buckling, lifting and cracking of primary shell coats Allows faster drying of primary c

50/50 Core Mix - 44 lbs.

Used to hand pack cores Used primarily by ferrous casters Exothermic as it sets; which, in most cases, prevents it from being used

Customcote® binder

Strong ceramic shells with many potential benefits over standard colloidal silica and ethyl silicate shells Can be used for primary and backup shell coats and with a variety of refractories

Wet-It wetting agent - 1 gallon

ReDip™ indicator - 1 gallon

Takes the guesswork out of shell drying For use with water-based binders Prevents loss due to sloughing of undried coats

R&R® BFA brown fused alumina

A high-grade abrasive material Known for its hardness, toughness, and excellent performance